An error occurred:
' + escape(e.message + '', true) + '';\n }\n throw e;\n }\n try {\n var _tokens = Lexer.lex(src, opt);\n if (opt.walkTokens) {\n if (opt.async) {\n return Promise.all(marked.walkTokens(_tokens, opt.walkTokens)).then(function () {\n return Parser.parse(_tokens, opt);\n })[\"catch\"](onError);\n }\n marked.walkTokens(_tokens, opt.walkTokens);\n }\n return Parser.parse(_tokens, opt);\n } catch (e) {\n onError(e);\n }\n }\n\n /**\n * Options\n */\n\n marked.options = marked.setOptions = function (opt) {\n merge(marked.defaults, opt);\n changeDefaults(marked.defaults);\n return marked;\n };\n marked.getDefaults = getDefaults;\n marked.defaults = exports.defaults;\n\n /**\n * Use Extension\n */\n\n marked.use = function () {\n var extensions = marked.defaults.extensions || {\n renderers: {},\n childTokens: {}\n };\n for (var _len = arguments.length, args = new Array(_len), _key = 0; _key < _len; _key++) {\n args[_key] = arguments[_key];\n }\n args.forEach(function (pack) {\n // copy options to new object\n var opts = merge({}, pack);\n\n // set async to true if it was set to true before\n opts.async = marked.defaults.async || opts.async;\n\n // ==-- Parse \"addon\" extensions --== //\n if (pack.extensions) {\n pack.extensions.forEach(function (ext) {\n if (!ext.name) {\n throw new Error('extension name required');\n }\n if (ext.renderer) {\n // Renderer extensions\n var prevRenderer = extensions.renderers[ext.name];\n if (prevRenderer) {\n // Replace extension with func to run new extension but fall back if false\n extensions.renderers[ext.name] = function () {\n for (var _len2 = arguments.length, args = new Array(_len2), _key2 = 0; _key2 < _len2; _key2++) {\n args[_key2] = arguments[_key2];\n }\n var ret = ext.renderer.apply(this, args);\n if (ret === false) {\n ret = prevRenderer.apply(this, args);\n }\n return ret;\n };\n } else {\n extensions.renderers[ext.name] = ext.renderer;\n }\n }\n if (ext.tokenizer) {\n // Tokenizer Extensions\n if (!ext.level || ext.level !== 'block' && ext.level !== 'inline') {\n throw new Error(\"extension level must be 'block' or 'inline'\");\n }\n if (extensions[ext.level]) {\n extensions[ext.level].unshift(ext.tokenizer);\n } else {\n extensions[ext.level] = [ext.tokenizer];\n }\n if (ext.start) {\n // Function to check for start of token\n if (ext.level === 'block') {\n if (extensions.startBlock) {\n extensions.startBlock.push(ext.start);\n } else {\n extensions.startBlock = [ext.start];\n }\n } else if (ext.level === 'inline') {\n if (extensions.startInline) {\n extensions.startInline.push(ext.start);\n } else {\n extensions.startInline = [ext.start];\n }\n }\n }\n }\n if (ext.childTokens) {\n // Child tokens to be visited by walkTokens\n extensions.childTokens[ext.name] = ext.childTokens;\n }\n });\n opts.extensions = extensions;\n }\n\n // ==-- Parse \"overwrite\" extensions --== //\n if (pack.renderer) {\n (function () {\n var renderer = marked.defaults.renderer || new Renderer();\n var _loop = function _loop(prop) {\n var prevRenderer = renderer[prop];\n // Replace renderer with func to run extension, but fall back if false\n renderer[prop] = function () {\n for (var _len3 = arguments.length, args = new Array(_len3), _key3 = 0; _key3 < _len3; _key3++) {\n args[_key3] = arguments[_key3];\n }\n var ret = pack.renderer[prop].apply(renderer, args);\n if (ret === false) {\n ret = prevRenderer.apply(renderer, args);\n }\n return ret;\n };\n };\n for (var prop in pack.renderer) {\n _loop(prop);\n }\n opts.renderer = renderer;\n })();\n }\n if (pack.tokenizer) {\n (function () {\n var tokenizer = marked.defaults.tokenizer || new Tokenizer();\n var _loop2 = function _loop2(prop) {\n var prevTokenizer = tokenizer[prop];\n // Replace tokenizer with func to run extension, but fall back if false\n tokenizer[prop] = function () {\n for (var _len4 = arguments.length, args = new Array(_len4), _key4 = 0; _key4 < _len4; _key4++) {\n args[_key4] = arguments[_key4];\n }\n var ret = pack.tokenizer[prop].apply(tokenizer, args);\n if (ret === false) {\n ret = prevTokenizer.apply(tokenizer, args);\n }\n return ret;\n };\n };\n for (var prop in pack.tokenizer) {\n _loop2(prop);\n }\n opts.tokenizer = tokenizer;\n })();\n }\n\n // ==-- Parse WalkTokens extensions --== //\n if (pack.walkTokens) {\n var _walkTokens = marked.defaults.walkTokens;\n opts.walkTokens = function (token) {\n var values = [];\n values.push(pack.walkTokens.call(this, token));\n if (_walkTokens) {\n values = values.concat(_walkTokens.call(this, token));\n }\n return values;\n };\n }\n marked.setOptions(opts);\n });\n };\n\n /**\n * Run callback for every token\n */\n\n marked.walkTokens = function (tokens, callback) {\n var values = [];\n var _loop3 = function _loop3() {\n var token = _step.value;\n values = values.concat(callback.call(marked, token));\n switch (token.type) {\n case 'table':\n {\n for (var _iterator2 = _createForOfIteratorHelperLoose(token.header), _step2; !(_step2 = _iterator2()).done;) {\n var cell = _step2.value;\n values = values.concat(marked.walkTokens(cell.tokens, callback));\n }\n for (var _iterator3 = _createForOfIteratorHelperLoose(token.rows), _step3; !(_step3 = _iterator3()).done;) {\n var row = _step3.value;\n for (var _iterator4 = _createForOfIteratorHelperLoose(row), _step4; !(_step4 = _iterator4()).done;) {\n var _cell = _step4.value;\n values = values.concat(marked.walkTokens(_cell.tokens, callback));\n }\n }\n break;\n }\n case 'list':\n {\n values = values.concat(marked.walkTokens(token.items, callback));\n break;\n }\n default:\n {\n if (marked.defaults.extensions && marked.defaults.extensions.childTokens && marked.defaults.extensions.childTokens[token.type]) {\n // Walk any extensions\n marked.defaults.extensions.childTokens[token.type].forEach(function (childTokens) {\n values = values.concat(marked.walkTokens(token[childTokens], callback));\n });\n } else if (token.tokens) {\n values = values.concat(marked.walkTokens(token.tokens, callback));\n }\n }\n }\n };\n for (var _iterator = _createForOfIteratorHelperLoose(tokens), _step; !(_step = _iterator()).done;) {\n _loop3();\n }\n return values;\n };\n\n /**\n * Parse Inline\n * @param {string} src\n */\n marked.parseInline = function (src, opt) {\n // throw error in case of non string input\n if (typeof src === 'undefined' || src === null) {\n throw new Error('marked.parseInline(): input parameter is undefined or null');\n }\n if (typeof src !== 'string') {\n throw new Error('marked.parseInline(): input parameter is of type ' + Object.prototype.toString.call(src) + ', string expected');\n }\n opt = merge({}, marked.defaults, opt || {});\n checkSanitizeDeprecation(opt);\n try {\n var tokens = Lexer.lexInline(src, opt);\n if (opt.walkTokens) {\n marked.walkTokens(tokens, opt.walkTokens);\n }\n return Parser.parseInline(tokens, opt);\n } catch (e) {\n e.message += '\\nPlease report this to https://github.com/markedjs/marked.';\n if (opt.silent) {\n return '
An error occurred:
' + escape(e.message + '', true) + '';\n }\n throw e;\n }\n };\n\n /**\n * Expose\n */\n marked.Parser = Parser;\n marked.parser = Parser.parse;\n marked.Renderer = Renderer;\n marked.TextRenderer = TextRenderer;\n marked.Lexer = Lexer;\n marked.lexer = Lexer.lex;\n marked.Tokenizer = Tokenizer;\n marked.Slugger = Slugger;\n marked.parse = marked;\n var options = marked.options;\n var setOptions = marked.setOptions;\n var use = marked.use;\n var walkTokens = marked.walkTokens;\n var parseInline = marked.parseInline;\n var parse = marked;\n var parser = Parser.parse;\n var lexer = Lexer.lex;\n\n exports.Lexer = Lexer;\n exports.Parser = Parser;\n exports.Renderer = Renderer;\n exports.Slugger = Slugger;\n exports.TextRenderer = TextRenderer;\n exports.Tokenizer = Tokenizer;\n exports.getDefaults = getDefaults;\n exports.lexer = lexer;\n exports.marked = marked;\n exports.options = options;\n exports.parse = parse;\n exports.parseInline = parseInline;\n exports.parser = parser;\n exports.setOptions = setOptions;\n exports.use = use;\n exports.walkTokens = walkTokens;\n\n}));\n","export * from \"-!../../../../node_modules/mini-css-extract-plugin/dist/loader.js??ref--9-oneOf-1-0!../../../../node_modules/css-loader/dist/cjs.js??ref--9-oneOf-1-1!../../../../node_modules/vue-loader/lib/loaders/stylePostLoader.js!../../../../node_modules/postcss-loader/src/index.js??ref--9-oneOf-1-2!../../../../node_modules/sass-loader/dist/cjs.js??ref--9-oneOf-1-3!../../../../node_modules/cache-loader/dist/cjs.js??ref--1-0!../../../../node_modules/vue-loader/lib/index.js??vue-loader-options!./MarkdownView.vue?vue&type=style&index=0&id=5db558f4&prod&lang=scss&\"","var render = function render(){var _vm=this,_c=_vm._self._c,_setup=_vm._self._setupProxy;return _c('div',[_c('MarkdownView',{attrs:{\"data\":_vm.changelogData}})],1)\n}\nvar staticRenderFns = []\n\nexport { render, staticRenderFns }","var render = function render(){var _vm=this,_c=_vm._self._c,_setup=_vm._self._setupProxy;return _c('section',{staticClass:\"markdown-view\"},[_c('article',{domProps:{\"innerHTML\":_vm._s(_vm.content)}})])\n}\nvar staticRenderFns = []\n\nexport { render, staticRenderFns }","\nimport { Vue, Component, Prop } from 'vue-property-decorator';\nimport { marked } from 'marked';\n\n@Component\nexport default class MarkdownView extends Vue {\n @Prop({ default: '' }) data!: string;\n\n content = '';\n\n mounted() {\n const removeUnreleased: RegExpMatchArray | null = this.data.match(/^## \\[\\d+.\\d+.\\d+\\]\\s{1,}[\\s\\S]{1,}/igm);\n const str = removeUnreleased?.[0] || '';\n this.content = marked.parse(str);\n }\n}\n","import mod from \"-!../../../../node_modules/cache-loader/dist/cjs.js??ref--14-0!../../../../node_modules/thread-loader/dist/cjs.js!../../../../node_modules/babel-loader/lib/index.js!../../../../node_modules/ts-loader/index.js??ref--14-3!../../../../node_modules/cache-loader/dist/cjs.js??ref--1-0!../../../../node_modules/vue-loader/lib/index.js??vue-loader-options!./MarkdownView.vue?vue&type=script&lang=ts&\"; export default mod; export * from \"-!../../../../node_modules/cache-loader/dist/cjs.js??ref--14-0!../../../../node_modules/thread-loader/dist/cjs.js!../../../../node_modules/babel-loader/lib/index.js!../../../../node_modules/ts-loader/index.js??ref--14-3!../../../../node_modules/cache-loader/dist/cjs.js??ref--1-0!../../../../node_modules/vue-loader/lib/index.js??vue-loader-options!./MarkdownView.vue?vue&type=script&lang=ts&\"","import { render, staticRenderFns } from \"./MarkdownView.vue?vue&type=template&id=5db558f4&\"\nimport script from \"./MarkdownView.vue?vue&type=script&lang=ts&\"\nexport * from \"./MarkdownView.vue?vue&type=script&lang=ts&\"\nimport style0 from \"./MarkdownView.vue?vue&type=style&index=0&id=5db558f4&prod&lang=scss&\"\n\n\n/* normalize component */\nimport normalizer from \"!../../../../node_modules/vue-loader/lib/runtime/componentNormalizer.js\"\nvar component = normalizer(\n script,\n render,\n staticRenderFns,\n false,\n null,\n null,\n null\n \n)\n\nexport default component.exports","export default \"## [Unreleased]\\n\\n## [1.8.34] 24.03.2025\\n\\n### Added\\n- Info Popup for new Web App is now shown once a week\\n\\n## [1.8.33] 18.03.2025\\n\\n### Fixed\\n- Error \\n\\n## [1.8.32] 18.03.2025\\n\\n### Fixed\\n- Installation Wizard undefined error\\n\\n## [1.8.31] 03.02.2025\\n\\n### Fixed\\n- Tenant Error in Electricity Counter Page\\n- Bug when adding new Flat that there are 2 empty Counters when going to the counters page\\n\\n## [1.8.30] 17.02.2025\\n\\n### Changed\\n- Update default value in Installation Wizard\\n- Remove documentation\\n\\n### Fixed\\n- Wizard Default Mappings: fix wrong mapping for Big Consumer (switch_emergency)\\n- Heating Pump (SG Ready): if pilot line is selected. the mappings for power and counter where wrong\\n- Tenant undefined error\\n\\n## [1.8.29] 17.01.2025\\n\\n### Changed\\n- Changed Limit for Battery to 80 (EMS and EnergyView)\\n\\n## [1.8.28] 13.01.2025\\n\\n### Fixed\\n- Fix CSV export data not updating when using the arrow buttons to switch between dates\\n\\n## [1.8.27] 02.12.2024\\n\\n### Fixed\\n- Wizard Path Page failing for String Inverter Only Project\\n\\n## [1.8.26] 26.11.2024\\n- Trim empty spaces from Names in Permissions Page\\n\\n## [1.8.25] 18.11.2024\\n\\n### Changed\\n- Zammad Links for new Documentations\\n\\n## [1.8.24] 14.11.2024\\n\\n### Fixed\\n- EMS Settings: Wrong behaviour of new switches\\n\\n## [1.8.23] 13.11.2024\\n\\n### Changed\\n- System Test Page: information texts and display colors\\n\\n## [1.8.22] 13.11.2024\\n\\n### Changed\\n- System Test Page: Changed times for different test steps\\n\\n## [1.8.21] 12.11.2024\\n\\n### Changed\\n- Set disableInstallationWizardPopup to false on duplication\\n\\n## [1.8.20] 24.10.2024\\n\\n### Added\\n- Regelenergie Settings to EMS\\n- Additional Indicators for EMS Modes, Paragraph 14A and Feed In Limitation\\n- Undefined check in Charging Station V2 Device\\n\\n### Changed\\n- Remove all users from Charging Station V2 when duplicating a project\\n- Limits for battery and pv in EMS\\n\\n## [1.8.19] 16.10.2024\\n\\n### Fixed\\n- Fixed issue with battery limit in installation wizard\\n\\n## [1.8.18] 14.10.2024\\n\\n### Added\\n- possibility for superadmin to skip wago check in tenant\\n\\n### Fixed\\n- Variable Issue in Solarmax Wizard\\n\\n## [1.8.17] 01.10.2024\\n\\n### Added\\n- Info on what Inverter caused the Setup Assistant Configuration to Fail\\n\\n## [1.8.16] 30.09.2024\\n\\n### Changed\\n- Order of Invoice History\\n\\n### Fixed\\n- Fix if some flats dont have last period infos\\n\\n## [1.8.15] 26.09.2024\\n\\n### Changed\\n- Removed Timeout on Pushbuttons and added Mouse Leave event to send the release command\\n\\n## [1.8.14] 26.09.2024\\n\\n### Added\\n- IBN Assistant: added new text on String Logger Page\\n- Installation Wizard: Up to 10 string inverters\\n- Installation Wizard: Page displaying the found inverter configuration\\n- Installation Wizard: Added new systems to System Test Page\\n- Installation Wizard: New Page for Wizard Path Definition\\n- Installation Wizard: Possibility for Master Slave on Deye Systems with up to 5 hybrid inverters\\n\\n### Changed\\n- Installation Wizard: Limit of chp changed to 3\\n- Delete Modal Form: trim empty spaces from beginnig and end of strings\\n- Toggle Button if mouse up is not detected. It will be automatically triggered after 5 seconds or on page leave\\n\\n### Changed\\n- Single Systems Chart: consider external energy measurements for house series\\n\\n### Fixed\\n- Components Page: fixed chargestation not loading for old versions (before newChargeStationLimitDate)\\n- Energy Flow Chart: fixed problem that caused Production to Grid to not be correct\\n\\n## [1.8.13] 29.08.2024\\n\\n### Added\\n- Installation Wizard: Possibility for Master Slave on Deye Systems with up to 5 hybrid inverters\\n- Installation Wizard: Up to 10 string inverters\\n- Installation Wizard: Page displaying the found inverter configuration\\n- Installation Wizard: Added new systems to System Test Page\\n- Installation Wizard: New Page for Wizard Path Definition\\n\\n## [1.8.13] 29.08.2024\\n\\n### Added\\n- General Settings: added new field for plc performance level\\n- Check Protocol: added new points\\n- General Settings: added new field for plc performance level\\n- Check Protocol: added new points\\n- New EMS Property: calculate_as_external_device\\n- New EMS Property: calculate_as_external_device\\n\\n### Changed\\n- EMS Battery Settings: removed multiple batteries check and changed text\\n- Add default plc timeout as constant\\n- In Chart Stats calculation of house is now the same as in Energy Flow View\\n- Basic Tenant model editor: flat changes now get saved even if expansion panel is still open\\n- Installation Wizard: Limit of chp changed to 3\\n- Basic Tenant model editor: flat changes now get saved even if expansion panel is still open\\n\\n### Fixed\\n- Chart stats not updating when selecting a date with the calendar\\n- Add check for House Consumption negative values\\n- Filter negative production values from energy flow chart\\n- On Project duplication, add undefined checks for Device and Area Order\\n- Electricity Counter Communication Status: fix indicator and message\\n- EMS Circle showing 0 when it should not\\n- Tenant Statistics: fix status indicator always showing green\\n- convert negative values for producers in EMS/Energyview\\n\\n## [1.8.11] 19.08.2024\\n\\n- add missing check for '!Solarmax' dependency\\n\\n## [1.8.10] 08.07.2024\\n\\n### Changes\\n- Text change in Installation Wizard\\n\\n### Fixed\\n- fixed wrong number beeing send for number of EM Meters in Tenant Wizard\\n\\n## [1.8.12] 23.08.2024\\n\\n### Fixed\\n- Connectivity Check not being activated when enabling notifications for some users\\n\\n## [1.8.11] 19.08.2024\\n\\n- add missing check for '!Solarmax' dependency\\n\\n## [1.8.10] 08.07.2024\\n\\n### Changes\\n- Text change in Installation Wizard\\n\\n### Fixed\\n- fixed wrong number beeing send for number of EM Meters in Tenant Wizard\\n\\n## [1.8.9] 25.06.2024\\n\\n### Added\\n- Tenant: added check for electricity counter communication\\n- Tenant Statisitc: add status indicator for electricity counter communication\\n- Add new Battery Type: MobileBatteryDeye\\n- For MobileBatteryDeye adapted the installation wizard\\n- Charts Button to change line style from line to area\\n\\n### Changed\\n- Added check for Enable Battery Button in EMS Settings\\n- Logger Systems: remove Charts that are not needed\\n- Check Protocol: added new points\\n- EMS/EnergyView: charts changed series scaling in Energy Flow Chart\\n- Charging Station V2 default mapping removed mapping for error warning\\n\\n### Fixed\\n- EMS Charts: fixed wrong chart stats showing\\n- Undefined error on duplication of project\\n- Wrong variables sent in Azzurro Setup Assistant\\n- Installation Wizard: Webasto Charge Stations not loading type correctly\\n\\n## [1.8.8] 05.06.2024\\n\\n### Added\\n- Tenant Wizard Counter Pages: duplicate counter check now also enabled when automapping is disabled\\n- Tenant Statistic: added new charts for power (kW) for electicity counters\\n\\n### Changed\\n- Tenant Electricity Counter Page: change detection for webasto unite charge station\\n\\n### Fixed\\n- EMS Charts: fixed problem with chart navigation\\n\\n## [1.8.7] 03.06.2024\\n\\n### Added\\n- Solarmax System with its modified version of the Installation Wizard \\n\\n## [1.8.6] 23.05.2024\\n\\n### Changed\\n- Tenant Electricity Counter Page: removed popup\\n- Tenant Electricity Counter Page: change order of selection items for flat counters\\n\\n### Fixed\\n- EMS Settings failing to load when no battery is present\\n\\n## [1.8.5] 22.05.2024\\n\\n### Added\\n- Check for date inside Installation Wizard, Internet Connection and Wizard Info Popup\\n- Tenant Wizard: Add possibility to connect AC Batterys\\n- Tenant Wizard: hybrid system and tenant only system\\n- Charging Station V2\\n- Installation Wizard: Heating Pumps for up-to-date PLC's\\n- Installation Wizard: More Pilot Line Options (PV, Generator, CHP)\\n\\n### Fixed\\n- Missing Generator Mappings in Installation Wizard\\n- Wrong Battery Enable Variable in EMS Settings\\n- Project Duplication: PLC Update Date not being cleared\\n\\n### Changed\\n- Chart Stats: change name for seriestype (View). If no name is set we use the variable name just like in the app\\n- Installation Wizard: Amount of Charge Stations for up-to-date PLC's\\n- Installation Wizard: loading overlay now shows the loading count as percentage in a circular progress bar\\n\\n## [1.8.4] 29.04.2024\\n\\n### Fixed\\n- Chart Modal Scaling Fields not showing\\n\\n## [1.8.3] 24.04.2024\\n\\n### Fixed\\n- Wrong value sent for legionella protection\\n\\n## [1.8.2] 23.04.2024\\n\\n### Changed\\n- Feedback for basic controls to 30s\\n- Max Checks for installation Wizard to 30 seconds\\n\\n### Fixed\\n- Chart Modal Scaling Field showing Nan when you type minus\\n\\n## [1.8.1] 18.04.2024\\n\\n### Changed\\n- Delete Timer changed from 10 seconds to 5 seconds\\n- Mapping in System Types for Logger Wizard\\n\\n### Fixed\\n- Project Meta undefined error when entering project\\n- Map showing wrong projects in Partner Workspace\\n\\n## [1.8.0] 11.04.2024\\n\\n### Added\\n- Check for date inside Installation Wizard, Internet Connection and Wizard Info Popup\\n- Energy IO Device\\n- Project Filter by Status: display number of projects with the status\\n- Partner Workspace: in Solar Calculator Page. The Project Name given in the Solar Calculator will now be saved\\n- Weco Slim Stack Battery Type to Logger Wizard\\n- New Entry in the Check Protocol (Connecting EC-Power CHP components and checking communication)\\n\\n### Changed\\n- Update ML Model Creation Options\\n- Behaviour of Offline Timer component\\n- Heartbeat offset for Status Indicator (internet and project ) is now 60 seconds\\n- Check for date inside Installation Wizard, Internet Connection and Wizard Info Popup\\n- Filter Heartbeat from Measurements List\\n\\n### Fixed\\n- Fix problem that caused map markers to not be displayed correctly\\n- Error that occurred when updating EMS with no error warning mapped\\n\\n## [1.7.2] 03.03.2024\\n\\n### Changed\\n- Project Online Dot: changed interval for timestamp check\\n\\n## [1.7.1] 21.03.2024\\n\\n### Added\\n- Partner Workspace & Partner Management new Icons\\n\\n### Fixed\\n- Tenant Error that caused the Tenant Statistic to not load correctly\\n\\n## [1.7.0] 21.03.2024\\n\\n### Added\\n- Legionella Protection to Installation Wizard\\n- new Feature Partner Workspace & Partner Management\\n- Internet Connection Symbol\\n\\n### Fixed\\n- Installation Wizard: Info Popup caused error when removing battery\\n\\n## [1.6.23] 14.03.2024\\n\\n### Changed\\n- Text in Delete Project Modal to fit every object\\n\\n## [1.6.22] 13.03.2024\\n\\n### Added\\n- Automatically entering project after creation\\n- Tenant Wizard: added new information text in tariff settings\\n- Tenant Wizard: added button for split equal of sidecosts\\n- Tenant Wizard: added new interval option (never)\\n\\n### Changed\\n- Tenant Wizard: removed logo upload field\\n- Renamed Tenant Power Model to Tenant Power Billing\\n- Room Card: doesnt show amount of devices anymore\\n- EMS / EnergyView: renamed Tiles for actual view and energy flow view\\n- Wizard: Minimum limit of grid feed in on Grid DRM page to 10\\n- Delete Project Modal: Additional Steps for Deletion to prevent accidental deletion\\n\\n### Fixed\\n- EMS Charge Station Settings: Fix Charge Mode switch\\n\\n## [1.6.21] 08.03.2024\\n\\n### Fixed\\n- Internet Indicator shown in wrong projects\\n\\n## [1.6.20] 07.03.2024\\n\\n### Added\\n- Installation Wizard: Confirmation Dialog when Weco Battery Stack or Slim Stack is selected\\n\\n### Changed\\n- Data Loading in Charts\\n- Symbol that Displays if the controller is connected to the internet\\n- Multiple Battery Optimization State Indicators to EMS Battery Systems and General Mappings\\n\\n### Changed\\n- Data Loading in Charts\\n- Energy Devices changed behavior of animation when Boiler Temperature is visible for Electric Heating Systems\\n\\n## [1.6.19] 05.03.2024\\n\\n### Fixed\\n- Error that caused a wrong amount of ac pv systems to be set when used in installation wizard\\n\\n## [1.6.18] 01.03.2024\\n\\n### Added\\n- Add Delete Tenant Button\\n- Tenant Wizard: one billing component is now required\\n\\n### Changed\\n- Installation Wizard: Available Battery Capacities\\n- Installation Wizard: Deye Systems can now deselect the battery\\n- Moved Enable Battery from EMS Battery Component Settings to General EMS Settings\\n\\n### Fixed\\n- Error that caused the Tenant Statistic to not load correctly\\n\\n## [1.6.17] 29.02.2024\\n\\n### Changed\\n- Tenant Wizard: add Cooling Page\\n- Tenant Wizard: Add option for all day tariff\\n- Tenant Statistic: changed charts, add consumption in kWh, display price of electricity tariff\\n\\n### Fixed\\n- Tenant Wizard: different small errors\\n- Installation Wizard: Available Battery Capacities\\n- Installation Wizard: Charge Stations and Electric Heating Elements not being disabled\\n\\n## [1.6.16] 21.02.2024\\n\\n### Changed\\n- Add null check in Tenant Statistic\\n\\n## [1.6.15] 20.02.2024\\n\\n### Added\\n- New Energy Flow Chart\\n\\n## [1.6.14] 13.02.2024\\n\\n### Fixed\\n- Installation Wizard: Fixed wrong mapping for off grid variable\\n\\n## [1.6.13] 09.02.2024\\n\\n### Added\\n- Installation Wizard: added new information text\\n\\n### Fixed\\n- Fixed error when removing user from notification\\n\\n## [1.6.12] 07.02.2024\\n\\n### Added\\n- EMS/Energy View: added Battery SOC as series to Energy Flow Consumption Chart\\n\\n### Changed\\n- EMS/Energy View: removed Self Consumption Charts\\n\\n### Fixed\\n- Error that caused update to fail for rules\\n- Project Filter: fixed problem that caused filter to not work correctly after going from project to home screen\\n\\n## [1.6.11] 01.02.2024\\n\\n### Added\\n- Automatically add production counter variable in Tenant Wizard if available\\n\\n### Changed\\n- Notifications: Notifications will now also add a alert action for the connectivity check if not allready present\\n- Filter By Project Status now also filters the projects visible inside the map banner markers\\n\\n## [1.6.10] 23.01.2024\\n\\n### Added\\n- Check Protocol added new points\\n- Filter Projects by Project Status\\n\\n### Changed\\n- Tenant Wizard: remove check for swift\\n- Tenant Wizard: Owner Registration Number not required anymore \\n- Tenant Wizard: adapt counting of counters. Now the digital counter is not counted anymore\\n- Rules: creating rule with no mail recipient will now work\\n\\n### Fixed\\n- Tenant Wizard: Error that can cause house number to be displayed wrong in Flats Settings\\n\\n## [1.6.8] 16.01.2024\\n\\n### Fixed\\n- Fixed problem that caused Reports not to show in the correct list\\n- Installation Wizard: Fixed wrong page visible when using the installation wizard for azzurro systems\\n\\n### Changed\\n- Charging Station Settings: load old current value if present when editing the charging mode\\n- EMS enabled animation in Actual View when Boiler Temperature is visible and bigger than 0\\n\\n## [1.6.7] 18.12.2023\\n\\n### Changed\\n- Energy Flow Consumer Chart. Now show house consumption as independent chart always\\n\\n## [1.6.6] 18.12.2023\\n\\n### Added\\n- General Settings: added new field that shows the selected battery type selected in the installation wizard\\n- EMS Electric Heating: added new Charts Window that show the boiler temperature\\n- EMS / Energy View: Energy Flow View will now update the values every hour when the page is open\\n\\n### Changed\\n- EMS/ EnergyView: Single Systems Charts now show Energy Counter Values\\n- Installation Wizard translations\\n- Installation Wizard: changed default value for Reserve in Battery for Emergency Power Operation to 15%\\n\\n### Removed\\n- EMS: removed Target Power for Systems Chart\\n\\n## [1.6.5] 30.11.2023\\n\\n### Added\\n- Installation Wizard for Logger Systems \\n- Loading Animation when Project online status is beeing loaded\\n- Installation Wizard for Deye Systems: adding PV String Inverters now works\\n\\n### Changed\\n- Overflow behaviour for Project Page Title\\n- Rules: changed default Subject text for Email Notification\\n- Behaviour of Toggle Buttons in Project\\n- EMS / EnergyView: changed calculation of house consumption for deye systems with loggers\\n- Text Changes Installation Wizard\\n\\n### Fixed\\n- Info Popup for Installation Wizard not showing\\n- Typo in Check Protocol settings\\n- Resize Problem in EMS / Energy View\\n\\n## [1.6.4] 09.11.2023\\n\\n### Fixed\\n- Tenant Wizard: flats not loading ocasionally not loading in Counter Page\\n\\n## [1.6.3] 09.11.2023\\n\\n### Changed\\n- Tenant Wizard: Tax and Bankcoordinate Fields are now optional\\n- Installation Wizard: changed Update Ui time to 15 seconds\\n- Tenatn Wizard: Replaced old Text Areas with new Text Areas\\n\\n### Fixed\\n- Text in tenant wizard final page\\n- Setpoint Optimizer: fixed wrong unit for temperature\\n\\n### Removed\\n- Description in Offline timer popup\\n\\n## [1.6.2] 06.11.2023\\n\\n### Added\\n- When adding a user to a project. The user will get default room access.\\n- When changing user role. The user will get default room access if not set allready.\\n- Release notifications\\n\\n### Fixed\\n- Error when deleting user in project. That the username is not displayed correctly inside the confirmation dialog.\\n- Wrong Text showing on last page of installation Wizard\\n\\n## [1.6.1] 26.10.2023\\n\\n### Added\\n- Admin Check in Welcome Page\\n\\n## [1.6.0] 26.10.2023\\n\\n### Added\\n- Added Tenant Model Wizard\\n\\n### Changed\\n- Theme Switcher: is now allways clickable on whole button\\n\\n### Fixed\\n- Report messages was overlapped by some dialogs\\n\\n## [1.5.16] 25.10.2023\\n\\n### Added\\n- EMS/Energy View: added force charge variables. And a status indicator to display if the force charge is active\\n\\n## [1.5.15] 24.10.2023\\n\\n### Changed\\n- Removed target power indicator for EMS and EnergyView\\n- Changed Background Color for Project Images\\n\\n## [1.5.14] 23.10.2023\\n\\n### Changed\\n- Removed stats from project card: device count, member count to improve performance\\n- Design of some elements: Project Card, Navigation Bar, App Bar, Theme Switcher, Light Theme\\n\\n### Added\\n- EMS: Added Target Power Indicator next to the Battery Item\\n- Missing translation in installation wizard\\n- Error Message when image upload fails in Project Settings\\n- Confirmation dialog in the Installation Wizard when leaving the User Invitation Page without the notifications enabled for any user\\n- Download Button for Checklist Protocol in Project Settings\\n\\n## [1.5.13] 16.10.2023\\n\\n### Added\\n- Info Popup on System test page in Installation Wizard\\n\\n### Changed\\n- Update list in Check Protocol\\n\\n### Fixed\\n- Textfield error message beeing cut off\\n\\n## [1.5.12] 12.10.2023\\n\\n### Added\\n- Additional point to protocol check list\\n\\n## [1.5.11] 12.10.2023\\n\\n### Fixed\\n- Problem with release\\n\\n### Changed\\n- Min and Max Value Validation: changed Texts to be more precise\\n\\n## [1.5.10] 12.10.2023\\n\\n### Fixed\\n- Protocol Checkbox in Project Settings\\n\\n## [1.5.9] 12.10.2023\\n\\n### Changed\\n- Off Grid translation for EMS\\n- Installation Wizard: when doing the wizard for the first time the\\nproject name has to be changed\\n- Create rules now possible in modal dialog\\n\\n### Added\\n- Placeholders for project list elements + Map Banner\\n- Added Protocol with list of TODO's for admin users inside project settings\\n\\n### Fixed\\n- MPPT Tracker changed to MPPT Inverter in EMS\\n\\n## [1.5.8] 09.10.2023\\n\\n### Changed\\n- Installation Wizard: Translations on Manuals Page\\n\\n### Fixed\\n- Validation for EMS Settings\\n\\n## [1.5.7] 05.10.2023\\n\\n### Changed\\n- validation in Project Settings\\n\\n## [1.5.6] 05.10.2023\\n\\n### Added\\n- Installation Wizard: added manuals page visible for Deye systems\\n- System Test Page: Progress Bar\\n- Skip Button for Initial Loading page in Installation Wizard if Wizard is already completed\\n- Popup when installation wizard was not used inside the project\\n- Possibility to disable the QR Code in the General Settings\\n- Information on Project Card: If Wizard was completed, pv power, battery capacity\\n- EMS Actual View Electric Heating now shows temperature + power values\\n- Permissions table: Add default sorting by owner column; Possibility to sort permissions table by column name, email;\\n\\n### Changed\\n- possibility to select 0 pv systems in installation wizard\\n- Installation Wizard: Limit of Transfer time from emergency power to grid in EMS Settings to 60s\\n- EMS/EnergyView: Grid can now display if it has connection to the grid\\n- Projects Search now also works with controller project id's\\n- Energy View: changed max limit of PV Systems to 40\\n- Default Mail Content of Notification Check\\n- Translation in MQTT Settings\\n\\n### Fixed\\n- problem that caused the installation to get stuck wizard on azzurro systems\\n- problem that confirmation dialog was visible when leaving general settings even if no changes were made\\n- in some cases started at calendar in Settings/General has invalid date \\n- Data Export Charts: fixed error that caused download to fail\\n- Charge mode label alignment\\n- Setpoint Optimizer: fix when editing/creating a device that the title fields are missing\\n\\n## [1.5.5] 14.09.2023\\n\\n### Added\\n- EMS Priorities modal\\n- Started At field in Settings General\\n\\n### Changed\\n- Changed Grid Size Connection Field in Installation Wizard from kW to A\\n- Installation Wizard: changed default name from PV systems from 'MPPT Inverter' to 'MPPT Trackers'\\n- Installation Wizard: changed limit of grid field\\n- Installation Wizard: generator page max limit of disable soc is not 95\\n- Translations in Notification Information Dialog\\n\\n### Fixed\\n- Problem that battery capacity is not shown in some cases. after wizard is completed\\n\\n### Removed\\n- Settings tab: Documents\\n\\n## [1.5.4] 05.09.2023\\n\\n### Added\\n- General Settings: QR Code for adding users\\n- Installation Wizard: Infobox on System Test Page\\n\\n### Changed\\n- removed billing information from navigation bar\\n- EMS charging station: use DropDown instead of Slider for minimal power\\n- Skipping Pilot Page in Installation Wizard if no pilot line is selected\\n\\n### Fixed\\n- Location display name sometimes showed only 1 letter\\n- Problem that blocked installation wizard to start\\n\\n## [1.5.3] 30.08.2023\\n\\n### Added\\n- Installation Wizard: PV Select\\n\\n### Fixed\\n- Minor Azzurro Wizard bugs\\n\\n### Changed\\n- Wizard Rules Page: Possibility to select users from project\\n\\n## [1.5.2] 29.08.2023\\n\\n### Added\\n- Installation Wizard: BHKW, System Test Page\\n\\n## [1.5.1] 28.08.2023\\n\\n### Added\\n- Time Lock settings for EMS generator\\n\\n### Fixed\\n- Central endpoint was overlapped by lines SetpointOptimizer\\n- Removed Inverter Power Input Field from EMS\\n- Show number of rules in App Bar\\n\\n### Changed\\n- If calculated house is negative then show previous value in EnergyView/EMS\\n\\n## [1.5.0] 17.08.2023\\n\\n### Added\\n- Added possibility to define project name in duplication process\\n- Specific Settings for Installation Wizard with Deye Battery System\\n- CHP (BHKW) system in EnergyView/EMS\\n\\n## [1.4.4] 07.08.2023\\n\\n### Added\\n- New Types of Reports that will be shown in seperate lists.\\n- Installation Wizard for Deye Systems Battery Tower. Added 18,4 kwh\\n- Installation Wizard: added restart of EMS\\n- Subtract external energy measurements from house\\n- Zev Report added new field for Grid Variable\\n\\n### Fixed\\n- EMS Actual View systems error warning\\n- Align control buttons of dynamic fields in EMS, Setpoint Optimiser\\n- Settings General confirmation dialog when save updated project\\n- Problem that focus on field gets lost when changing alias inside Variableslist\\n- Settings: when updating project owner user list will now update correctly\\n- fix 'no reports with name found' message shown in projects with no reports\\n- installation Wizard: fixed external measurement limit not updating correctly in UI\\n\\n### Changed\\n- Use one general checkbox to hide/show systems optional fields\\n- EMS Heating Pump Max Power field now required\\n- Translations to match the app in EnergyView and EMS Settings + Charts\\n- EMS/EnergyView house limit now 1\\n- EMS/EnergyView single system charts will now show 9 series per chart\\n- EMS/EnergyView EnergyCircle has more readable values\\n- EnergyView/EMS charts now show complete production (including generator) instead of only PV\\n\\n## [1.4.3] 13.07.2023\\n\\n### Added\\n- Missing translation for Title inside Report Modal Window\\n- button to duplicate report\\n- Confirmation dialog before deleting Rules, Reports and Members of a Project\\n- Searchbar for reports\\n\\n### Fixed\\n- fixed error that caused settings not to open correctly\\n- status of Tariff Settings not updating correctly\\n- fix empty gap in Installation Wizard\\n- problem that caused the tags to be removed from project\\n\\n### Changed\\n- spacing for Chart Window Buttons and Device Action Buttons\\n- EMS Settings: min value for \\\"Max deph of discharge in Emergency power mode\\\" is now 5\\n- change of location now works correctly\\n- Checkboxes inside Zev Report window are not clickable on the description text next to it\\n\\n## [1.4.2] 29.06.2023\\n\\n### Added\\n- Description about limits to IconList search field, error notification if request failed\\n- Added \\\"Actual PV Voltage\\\" and \\\"Actual PV Current\\\" to PV System Device and added chart window\\n- Boiler Temperature to Consumer Charts and Single Systems View\\n\\n### Fixed\\n- User Manual and API Docs is accessible again\\n- Period Navigation Buttons Alignment inside Charts\\n- Wrong unit for Energy Flow View. In EMS and Energy View\\n\\n## [1.4.1] 26.06.2023\\n\\n### Fixed\\n- Currency Field width inside settings\\n\\n## [1.4.0] 26.06.2023\\n\\n### Added\\n- Option to transfer project to Regelenergie from EMS settings (super-admin only)\\n- Currency Selection Field inside Energy Price Settings for project\\n- Status indicator when selecting Project inside Map Banner\\n- Notification when user cant be added due to limit as popup and in duplication log\\n- Installation Wizard inside Project Menu for Admin Users\\n- Confirmation dialog when leave Settings General, Energy Price pages\\n- Confirmation dialog when leave Manage Device, Manage ML Model, Manage Charts, Manage Anomaly modals\\n- Confirmation dialog when leave Create Project modal\\n- Inverter Power to EMS Settings and General EMS Mappings\\n\\n### Changed\\n- Move settings views to router\\n- Preview of Energy View and EMS now uses new EnergyVisualisation component\\n\\n### Fixed\\n- Charts not being duplicated when duplicating project or room\\n- Changed Translation for Grid\\n- Improve router access, disabled guards\\n\\n## [1.3.4] 09.05.2023\\n\\n### Fixed\\n- Fixed wrong request when editing a EMS\\n\\n## [1.3.3] 08.05.2023\\n\\n### Fixed\\n- System switching in charts of EnergyView/EMS\\n\\n## [1.3.2] 05.05.2023\\n\\n### Fixed \\n- Circle value in dialog of energy flow house system\\n\\n## [1.3.1] 04.05.2023\\n\\n### Added\\n- new Settings Item for Energy Price\\n- possibility to remove email recipients from rules when duplicating a project\\n\\n### Changed\\n- Removed general Error Warning Mapping from EMS V2\\n- Navigation Buttons in EMS/EnergyView/SetpointOptimizer Charts replaced by Tabs\\n- Minimum Update Time for EMS to 10 seconds\\n- Changed design of EMS Actual View Tooltip\\n\\n### Fixed\\n- Energy Flow View not loading when Battery or Grid is missing.\\n- MPC EMS fixed overflow issue for Device count of house systems in Energy Flow View\\n- EMSSchema stage 2 validation now also validate dependent fields\\n- EMS V2: fixed Settings validation\\n- Old EMS error that caused validation to fail in edit modal\\n- removed wrong colored area in Tags Filter Popup Window\\n- Chart Controlling Consumer navigation tabs order\\n- EMS / EnergyView not showing all houses\\n- Systems in EMS / EnergyView not having lines\\n\\n## [1.3.0] 14.04.2023\\n\\n### Added \\n- Devices: EMSV2, EnergyViewV2\\n- Chart Variable values get converted to different units \\n\\n### Changed\\n- Chart Controlling Consumer changed aggregation to average for power values\\n- Single Systems Charts for Energy View added navigation tabs\\n- Project tag filtering: projects that have any of the chosen tags are shown\\n- Only show series/variables in charts of available systems\\n- Chart axes scale automatically if value goes outside a set min/max scaling\\n\\n### Fixed\\n- Alignment of Systems in EMS/EnergyView\\n- Alignment of initial Loader fo EMS/Energy View\\n- fix Chart Stats don't update correctly on period change with arrow buttons\\n\\n## [1.2.16] 30.03.2023\\n\\n### Changed\\n- Removed EMS Charts: Heating Power Consumption, Heating Power Production (Suurstoffi)\\n\\n### Fixed\\n- Hide some not required Settings (Ronovatec)\\n\\n## [1.2.15] 29.03.2023\\n\\n### Added\\n- Added timeout while loading of chart data\\n- Translations for width Field in Modal window of charts\\n- Added info field for rule timeout. Default timeout is now 240 seconds\\n- Confirmation window when decrease EnergyView, EMS, Setpoint Optimiser systems amount\\n- Heating Buffer Settings in EMS System Instance\\n- Added Tags for Project that the User can use to filter Project by Tags inside Home Window\\n\\n### Changed\\n- Changed Edit Rule button translation\\n- Not displaying battery in EMS/EnergyView if not available\\n- Not showing pv/battery variables and charts if not available\\n\\n### Fixed\\n- MQTT Spamming after deleting project\\n- EMS Systems not showing in EnergyFlowView\\n- Deleted Systems displayed in EMS\\n\\n## [1.2.14] 22.03.2023\\n\\n### Changed\\n- Duplication Log design changes\\n\\n### Fixed\\n- Error while duplication when favorites order is undefined\\n\\n## [1.2.13] 20.03.2023\\n\\n### Fixed\\n- Energy Counter translations in EMS/EnergyView\\n- Error that can cause User Feedback to be disabled inside Settings\\n- Favorites not duplicated correctly\\n\\n## [1.2.12] 16.03.2023\\n\\n### Added\\n- Scrolling to last position when returning from Project to Project List\\n- Log after Duplication that shows Status of duplication Steps\\n\\n### Changed\\n- EnergyView Soc value is now allways showing average when multiple Batteries are mapped\\n- Design of Tooltip inside Variableslist and for Textfields inside Modal windows so text is more easy to read\\n- Translation for Energy Counter and Reverse Energy Counter\\n\\n### Fixed\\n- Changelog not showing the last few version\\n- Batteries/Grid not showing in EMS/EnergyView\\n- Error on language change inside Areas\\n- Error during duplication when adding another admin to the project\\n- MQTT Info not being updated when duplicating project\\n- Cut off Project Name\\n- Project Save button grayed out (Ronovatec)\\n\\n## [1.2.11] 08.03.2023\\n\\n### Added\\n- Translations for Single Systems View inside new Energy View\\n- Devices not yet sorted by user are sorted horizontally.\\n- EMS Mappings in General and Heating Pump\\n- Heating Power Production / Consumption Charts in EMS Charts Prod / Cons if heating pumps are included\\n- Ronovatec: Added Changelog Menu Entry\\n\\n### Fixed\\n- Cut off labels in Create/Edit Modals\\n- Wrong unit being shown in Actual Instance View of all Setpoint Optimizer Systems\\n- Error not showing in EMS Settings\\n- Fixed problem in anomaly charts that series colors are not the same as in the legend\\n- MPC Devices will now get deleted correctly when deleting a Project\\n- Role Info Button Alignment in Permissions Settings\\n- EMS/EnergyView edit window navigation dropdown list background same color\\n- Bug in input field for calculation chart expression\\n\\n### Changed\\n- Translation inside Energy View/EMS settings window\\n- User Room Access after Duplication\\n- Downgrade Vuetify from 2.6.14 to 2.3.20 to resolve style issues\\n- Targetfield inside Rules now also support Floating-point numbers\\n- Scrollbar behaviour for MPC Devices\\n\\n## [1.2.10] 22.02.2023\\n\\n### Fixed\\n- Style fix for InputFieldBase and InputFieldTextBase\\n- fixed missing alias descriptions\\n\\n## [1.2.9] 21.02.2023\\n\\n### Changed\\n- changed to different Endpoint for Alias duplication\\n\\n## [1.2.8] 21.02.2023\\n\\n### Fixed\\n- Fixed Problem that alias dont get duplicated on Project duplication\\n\\n## [1.2.7] 20.02.2023\\n\\n### Added\\n- Added text when chart is loading for long time\\n- Loading/error/success feedback for basic controls\\n\\n### Changed\\n- removed Downloads for some Whitelabels\\n- Updated Search inside Measurements\\n- Modal Window for duplication of Project\\n- Chart Loading behaviour when not visible on screen\\n\\n### Fixed\\n- Problem that MPC devices don't get deleted when you delete room with one in it\\n- Fix problem that Rooms are not loaded on Page reload inside settings\\n\\n## [1.2.6] 13.02.2023\\n\\n### Changed\\n- Changed Address to Type in General Settings\\n\\n## [1.2.5] 13.02.2023\\n\\n### Added\\n- More General Settings Fields\\n\\n## [1.2.4] 09.02.2023\\n\\n### Added\\n- Informative Description for each User Role in Permission Settings\\n- Sections Expert and Controller Address to General Settings\\n- Window for Room Duplication\\n\\n### Changed\\n- Removed Autarkiegrad from SingleSystemView variables\\n- Calculating average for batteries in SingleSystemView\\n- Energy View Consumer Systems Power not optional\\n\\n## Fixed\\n- Fixed Heatingpump not showing on Energy View devices\\n\\n## [1.2.3] 02.02.2023\\n\\n### Added\\n- Optional Variables energy_counter for all systems and reverse_energy_counter for grid+battery in EMS/EnergyView\\n- Area and Device Order is being copied during duplication\\n- Area Action to duplicate single area\\n- Self Consumption charts for EnergyView\\n- Add Changelog view\\n\\n### Fixed\\n- Project Name not updating in App Bar\\n- Device Actions menu item was not trigger when pres on specific area\\n\\n### Changed\\n- Width of Alias Textfield in Variables\\n- Alias Textfield in Variables to Description Field and changed List Item of Variable Fields \\n\\n## [1.2.2] 20.01.2023\\n\\n### Added\\n- Modal window when duplicating a device where the user can select how many copies should be created\\n\\n### Changed\\n- EMS/Energy View, removed decimal points from Battery SOC indicator\\n\\n### Fixed\\n- Error that table in Permissions Tab doesn't look correct\\n- Error with new Energy View device on Project duplication\\n- Fixed Unauthorised error when creating/deleting Room \\n\\n## [1.2.1] 17.01.2023\\n\\n### Added\\n- Alias for variables are now available\\n- Devices with unsaved positions are sorted by creation date\\n- Duplication of Measurements and Alias when duplicating a Project\\n\\n### Changed\\n- EMS: Switched colors of PLC Status Indicator\\n- Chart Stats, sum of difference values now only show 2 decimal places\\n- Order of Grid, Battery tabs in ManageEMS schema and chart section\\n- EMS/EnergyView: Increased limit for quantity of PV to 40 and Battery to 20\\n- Updated keycloak dependencies: vue-keycloak-js 2.1.5 with keycloak-js 20.0.3\\n\\n### Fixed\\n- Energy device content jumping when energy flow view loaded\\n\\n## [1.2.0] 23.12.2022\\n\\n### Added\\n- Time Slider value in passed between View and Modal Windows\\n- New MPC EnergyView device\\n\\n### Changed\\n- manage user access window will now show username of current selected user and also will close when you save the current selection\\n- Readonly users can now add and delete devices from favorites\\n- Central Endpoint renamed to Central Energy Point\\n\\n## [1.1.10] 20.12.2022\\n\\n### Added\\n- made info tooltip for mpc devices at bottom right that shows the error message of an device\\n- Save Areas, Area Devices positions in member meta\\n- Control Status Indicator and Calculated Battery Power in EMS Settings\\n- Modalwindow in Permissions where Room access can be given to normal users and read only users\\n- Duplicate project button will now only be visible for super users\\n- Save Areas, Area Devices positions in member meta\\n- favorites are now user specific\\n\\n### Changed\\n- move MQTT client to store\\n- Information messages for user when deleting/updating members are now translated\\n- Changed to new response format for predictions\\n\\n### Fixed\\n- DeviceLayout, MPCLayout props types\\n- General tab types\\n- fixed problem with Report tariffs\\n- Currency Button Design\\n- fixed no data in Report download again\\n\\n## [1.1.9] 08.12.2022\\n\\n### Fixed\\n- House Consumption Variable when no other consumers are mapped in EMS Charts\\n- Hybrid Circle not displaying second value in Modal\\n- canMemberAccess in AppDrawer list\\n\\n## [1.1.8] 07.12.2022\\n\\n### Added\\n- duplicate of all rules now works\\n- Add super_user flag to User class\\n- User roles in project: read-only, normal user and admin\\n- Create report modal window\\n- Animation for loading Charts\\n\\n### Changed\\n- Showing SOC when its 0\\n- Energy Flow View / Charts values to new endpoint\\n- EMS battery: state_reset and switch_reset are now optional fields\\n- Minor dependency upgrades\\n\\n### Fixed\\n- Jumping of EMS Size\\n- problem when variable is not in measurements\\n- EMS settings tariffs validation\\n- fixed problem that charts get created with wrong color values\\n- Charts in PV Production service, Consumption service, Heating Prediction service\\n- AppBar buttons flexibility\\n- Energy Chart in Heating Prediction Service\\n- fixed problem that device actions dont show up for admin on every device\\n- Energy Flow View Month not getting data\\n- Manage areas rules import\\n- List in UserProfile component\\n- Energy View Device error\\n- EMS Chart Variables not showing\\n- DND button not showed when reload page on pages Favorites, Areas\\n- Minimized area view actions\\n- Reports validation, Zev report, Normal report, Reports store\\n\\n## [1.1.7] 22.11.2022\\n\\n### Added\\n- Notifications for failed report requests\\n- Auto rules for duplicate\\n- Color to EnergyFlowDisplayData\\n- charts only load when visible on screen\\n\\n### Changed\\n- Arrow Animation for Bi Directional EMS Circles\\n- Minimum Reserve in Battery to 10%\\n- Energy Flow View Design: Arrow Speed, Value Displayed, Font Weight Animation\\n- changed behaviour in rules for timeout\\n\\n### Fixed\\n- EventList types\\n- Reports types\\n- Energy Flow View: Color for Production Circles\\n- Reports validation, Zev report, Normal report, Reports store\\n- Truncate AppBar title width\\n\\n## [1.1.6] 14.11.2022\\n\\n### Changed\\n- modal window colors\\n- mails in dashboard changed to office@lynus.io\\n\\n### Fixed\\n- fixes chart not loading correctly\\n- cost savings corrected calculation\\n- fixed mpc problem when duplicating project\\n- fixed roomdata difference problem\\n- Energy Flow calculatedProducerSystem undefined\\n- Energy Flow View Calendar Navigation\\n- Energy Flow View Calendar Arrow Navigation\\n\\n## [1.1.5] 09.11.2022\\n\\n### Added\\n- Circle Spinner animation when loading Energy Flow View Data\\n- new Timeseries endpoint is now used to load chart data\\n- Added Reload button for charts on error\\n- Added border for device preview images inside of modal windows\\n- address fields in zev reports\\n- EMS added missing changes to preview\\n- Modular Chartheight for default chart devices\\n\\n### Changed\\n- Color changes Energy Schema\\n- made one tooltip in forecast charts\\n- EMS / Setpoint enabled modify of error/warning Variable\\n- Added missing Calendar features in Energy Flow View\\n- Energy Flow Unit to Unit Class\\n- getWeekBounds function in charts now only uses js date functions\\n- removed autarkiegrad from ems chart prod cons\\n- added missing number units\\n- Changed calculation in flow view\\n- added falsely removed variables from Energyflow consumer chart\\n- Chart height settings in EMS\\n- Order of EMS Chart Tabs\\n\\n### Fixed\\n- EMS fixed size problem on small screens (circles and stuff only take half width)\\n- Fixed that charts dont show new values after updating chart model\\n- Energy View fixed problem atfer remaping the device to show wrong lines\\n- Several issues with cost savings in EMS\\n- fixes color problem if user switches theme during load\\n- fixed data export problem that one series is missing (Anomaly Chart)\\n- fixed wrong lang mapping for duplicate action button\\n- Height of Loading Spinner in Energy Flow View\\n- EMS actual, forecast views layout\\n- EMS condition if data not defined\\n- CurrentRoomData Error\\n- fixed problem that current Room information doesnt get loaded when editing a room\\n- Project loader behavior\\n- Autarchy Value below 0\\n- Reports layout\\n- Refactored Events list\\n- EMS ActualView @Provide/@Inject\\n- Missing variables in EMS Forecast Chart\\n- Report when no data is in file\\n\\n## [1.1.4] - 13.10.2022\\n\\n### Added\\n- Energy Flow View to Preview\\n- Energy Flow Charts to Preview\\n\\n## [1.1.4] - 13.10.2022\\n\\n### Added\\n- Variables in Forecast PV Chart\\n- Modal Window for max power variable in EMS\\n- Tab translations\\n- Button to switch currency in energy flow view\\n\\n### Changed\\n- made either Grid or battery required for EMS\\n- Disabled tab switch animation in EnergyFlowView\\n- Function to calculate cost savings\\n- Added formatter to prevent to many Floating Points in chart y-Axis\\n- Background colors Modal Creation Windows\\n\\n### Fixed\\n- colors in MPC Schema\\n- create Device Button in Bottom of Area\\n- fixed Rule timeout showing wrong value\\n- Background color of calendar in EnergyFlowView\\n- displaying 0 instead of NaN in EnergyFlowView when loading\\n\\n## [1.1.3] - 04.10.2022\\n\\n### Added\\n- New Modalwindow Component\\n\\n### Changed\\n\\n### Fixed\\n- Preview Image Size problem\\n- Background colors in EMS Views ( Forecast and EnergyFlow )\\n\\n## [1.1.2] - 03.10.2022\\n\\n### Added\\n\\n- Heating Circuit Optimization translation for additional room temperature\\n- Missing translation Device Actions (Duplicate)\\n- Color Selection for chart series\\n- EnergySchema EnergyView added valdiation for all fields\\n- Comparison Chart to Usermanual\\n- Anomaly Detection base component\\n- EMS: Added Energy Flow View with reusable EnergyCircle Component\\n\\n### Changed\\n\\n- Improved series names in energy flow consumer charts\\n- Added steps for device creation to readme\\n- Now basic controls are blocked if at least one mapping not fill\\n- EMS: ElectricHeating max power optional to required\\n- Heating Circuit Optimization replace button \\\"Add Room Temperatures\\\"\\n- Max of EV-Charging-Stations for EMS and Energyview set to 250\\n- EMS Energy Flow Consumer charts navigation: dropdowns with max 8 systems per chart\\n- Devices changed max Title length to 40\\n- Charts changed max Title length to 40 and max Unit Lenght to 10\\n- Position of data displayed in energy flow view\\n- rounding autarkiegrad\\n- Now basic controls are blocked if at least one mapping not fill\\n- EMS: ElectricHeating max power optional to required\\n### Fixed\\n\\n- Refactor basic controls\\n- OfflineCharts data display\\n- SetpointOptimizer local data update after change temperature settings\\n- ChartMath getVariableNames regex expression\\n- EMS autarkie grad loading\\n- Chart Navigation Background color\\n- EMS View Positions\\n- Wrong translations\\n- Refactor basic controls\\n- OfflineCharts data display\\n\\n## [1.1.1] - 14.09.2022\\n\\n### Added\\n\\n- Duplication of Devices and Projects is now possible\\n\\n### Changed\\n- Comparison Charts translations\\n- Chart Title color\\n- Searchbar for Variables\\n- Translations SetpointOptimizer\\n- Aligned Text in Systeminstances\\n- House tab is shown when no consumers are available\\n- removed unused functions\\n\\n### Fixed\\n- Comparison Charts stats window showing today's date\\n- Spacing Username\\n- Fixed scores in energy flow tabs\\n- Fixed translations in energy flow tabs\\n\\n## [1.1.0] - 06.09.2022\\n\\n### Added\\n\\n- Mixing Valve Preview: Added missing percent value\\n- New energy flow charts for Production, Consumption and Consumer\\n\\n### Changed\\n\\n- Create Device Button is now displayed in areas\\n- EMS: changed translation logarythm with algorythm\\n- Variable Counts in Variable Tab and Variables List in Settings is now updating on search change\\n- When deleting a project the weather service will be deactivated first\\n- EMS changed condition for the arrow animation. For Forecast Consumer Devices\\n- Valdiation Messages will now update on language change\\n- Changed support Email from info@lynus.io to support@lynus.io\\n- Improved sizing of Device Preview Image inside Modal windows\\n- Last created device/MPC device/anomaly chart is now stored\\n\\n### Fixed\\n\\n- PV Monitoring: fixed chart disappearing after search\\n- Fixed Search for eventlist\\n\\n## [1.0.43] - 05.07.2022\\n\\n### Changed\\n\\n- Translations\\n- EnergyView adaptations\\n\\n### Fixed\\n\\n- Ronovatec: fixed devices filter\\n\\n\\n## [1.0.42] - 04.07.2022\\n\\n### Changed\\n\\n- added access to anomaly and normal devices for ronovatec whitelabel\\n\\n## [1.0.41] - 18.05.2022\\n\\n### Fixed\\n\\n- Ronovatec robot slider fix\\n\\n\\n## [1.0.40] - 25.03.2022\\n\\n### Added\\n\\n- Added missing valdiation Rule for Grid in EMS\\n\\n## [1.0.39] - 24.03.2022\\n\\n### Changed\\n\\n- Changed min max speed for ronovatec robot device\\n\\n\\n## [1.0.38] - 24.03.2022\\n\\n### Fixed\\n\\n- Bug with ronovatec workbench buttons\\n\\n\\n## [1.0.37] - 22.03.2022\\n\\n### Fixed\\n\\n- create project ronovatec\\n- agg for calculation series\\n\\n\\n## [1.0.36] - 17.03.2022\\n\\n### Changed\\n\\n- grid max now 2000\\n\\n### Fixed\\n\\n- EMS in whitelabels\\n\\n\\n## [1.0.35] - 15.03.2022\\n\\n### Changed\\n\\n- timeout with 0 second timeout possible\\n\\n### Fixed\\n\\n- timezone forecast charts\\n- render problems rules\\n- NaN in input field base\\n\\n\\n## [1.0.34] - 10.03.2022\\n\\n### Changed\\n\\n- timeout when mpc is not loaded\\n- Ronovatec changes Robot Device\\n- TSG Modul Ladestation changed mapping\\n\\n## [1.0.33] - 09.03.2022\\n\\n### Added\\n\\n- new Device TSG Modul Ladestation\\n\\n### Fixed\\n\\n- PreviewImage in ModalView is not loaded correctly\\n- anomalycharts will now show everything normal even if anomaly score is not yet generated\\n\\n## [1.0.32] - 03.03.2022\\n\\n### Added\\n\\n- missing translation when no icon is selected in manage device\\n\\n### Changed\\n\\n- image name for electric charging station\\n\\n### Fixed\\n\\n- small fix HPP data export\\n\\n\\n## [1.0.31] - 01.03.2022\\n\\n### Changed\\n\\n- Wandfluh: change of selected theme color\\n\\n### Fixed\\n\\n- Lines not updating in EMS and other devices when making Navbar big or small\\n\\n\\n## [1.0.30] - 28.02.2022\\n\\n### Changed\\n\\n- more padding in roomtemps average\\n- set max Charging Station to 100\\n\\n\\n## [1.0.29] - 25.02.2022\\n\\n### Changed\\n\\n- SetPoint: added average Number in modalwindow of each device\\n- MPC Lib: splitted up MPC library in Energy and Heating Tab\\n- EnergyView, EMS, SetPoint: made titles in modalWindow to show the full name on hover\\n\\n### Fixed\\n\\n- EnergyView, EMS, SetPoint: fixed systemcount button color to adapt to theme.\\n\\n\\n## [1.0.28] - 23.02.2022\\n\\n### Changed\\n\\n- Custom Icon can now be removed\\n\\n### Fixed\\n\\n- Scrollbar for Previews of Devices\\n- MPC fix for wandfluh\\n\\n\\n## [1.0.27] - 16.02.2022\\n\\n### Changed\\n\\n- Heating Prediction change scaling EnergyChart\\n\\n### Fixed\\n\\n- Setpoint Optimizer fix\\n\\n\\n## [1.0.26] - 16.02.2022\\n\\n### Fixed\\n\\n- Setpoint Optimizer\\n\\n\\n## [1.0.25] - 16.02.2022\\n\\n### Changed\\n\\n- SetPointOptimizer: changed highlighting for Hybrid Groups\\n- MPC: disabled live and hour period of Calendars\\n- MPC: Added titles in library (device Description)\\n- HeatingPrediction: changed agg of Energychart last\\n\\n\\n## [1.0.24] - 14.02.2022\\n\\n### Added\\n\\n- PreviewImages for Ronovatec (Robot and Survey Client)\\n\\n### Changed\\n\\n- disabled max Value for Outputfields (Heating Predicrion)\\n\\n\\n## [1.0.23] - 11.02.2022\\n\\n### Changed\\n\\n- color swapped again for SetPoint Optimizer\\n\\n\\n## [1.0.22] - 11.02.2022\\n\\n### Fixed\\n\\n- fixes setpoint and heating prediction\\n\\n\\n## [1.0.21] - 11.02.2022\\n\\n### Changed\\n\\n- MPC Library: chart changes\\n- Heating Prediction: columnchart with costumApproximation of 1hour, day is now also selectable period\\n\\n\\n## [1.0.20] - 08.02.2022\\n\\n### Changed\\n\\n- Preview of Heating Prediction & Consumption Service\\n\\n\\n## [1.0.19] - 08.02.2022\\n\\n### Changed\\n\\n- Heating Prediction\\n- Max Unit length in Anomaly Charts\\n\\n\\n## [1.0.18] - 04.02.2022\\n\\n### Changed\\n\\n- Heating Predictor: changed charts scaling, swapped series of first chart, fixed missing translation\\n\\n\\n## [1.0.17] - 03.02.2022\\n\\n### Changed\\n\\n- height in charts for Heating Prediction\\n\\n### Fixed\\n\\n- Anomaly charts\\n\\n\\n## [1.0.16-patch] - 03.02.2022\\n\\n### Added\\n\\n- MPC: added filter for devices\\n\\n### Changed\\n\\n- EnergyView: changed button text in chart window\\n\\n### Fixed\\n\\n- Charts: fix problem when value is null\\n- HeatingPrediction: hotfix wrong mapping & added 3 chart\\n\\n\\n## [1.0.16] - 03.02.2022\\n\\n### Fixed\\n\\n- Variables Heating Prediction\\n\\n\\n## [1.0.15] - 01.02.2022\\n\\n### Added\\n\\n- MPC: added previewText to Heating Predictor\\n- MPC api to whitelabel configs\\n- New Prop that room exists for Createbutton in Rooms\\n\\n### Fixed\\n\\n- zoom problem with text for consumptionService and Heating Predictor\\n- Variables in settings\\n\\n\\n## [1.0.14] - 31.01.2022\\n\\n### Changed\\n\\n- EMS: 20 chargingstations now possible\\n- settings: change activate Weather service\\n\\n\\n## [1.0.13] - 27.01.2022\\n\\n### Added\\n\\n- version 1 of Heating Production Predicter Mpc device\\n\\n### Changed\\n\\n- scaling in setPointOptimizer\\n\\n### Fixed\\n\\n- duplicate anomalyScore on modify of chart\\n- endOfTick problem in EMS charts\\n\\n\\n## [1.0.12] - 14.01.2022\\n\\n### Added\\n\\n- Wandfluh: access to aiml library and workbench for anomaly\\n- TSG: access to anomaly and mpc\\n\\n### Changed\\n\\n- SetPoint: changes mlModal\\n- Charts: threshold filter for stats, stats in anomaly charts,\\n- scaling changes (all equal now includes unit also),\\n- seriescolor update in MPC devices and anomaly,\\n\\n### Removed\\n\\n- EnergyView: removed title in Charts window\\n\\n### Fixed\\n\\n- EMS: fix dropdown width in settings. (normal and preview)\\n- error with series (column charts)\\n\\n\\n## [1.0.11] - 23.12.2021\\n\\n### Fixed\\n\\n- Translations\\n\\n\\n## [1.0.10] - 22.12.2021\\n\\n### Fixed\\n\\n- EMS: bugs\\n\\n\\n## [1.0.9] - 22.12.2021\\n\\n### Added\\n\\n- Various improvements\\n\\n### Changed\\n\\n- EMS settings: added multiple fields for main fuse\\n\\n\\n## [1.0.8] - 20.12.2021\\n\\n### Added\\n\\n- offline chart for previews\\n- new series colors for charts\\n- Varibale list as new item in settings\\n\\n### Changed\\n\\n- Map Markers will now redirect to Eventlist when there are errors\\n- Refactoring InputFieldExternal fields\\n- Improved AnomalyCharts\\n\\n### Fixed\\n\\n- bugs in Chart Stats\\n- EnergyView/EMS fixed different problems\\n\\n\\n## [1.0.7] - 14.12.2021\\n\\n### Fixed\\n\\n- Setpoint Optimizer various fixes\\n- EMS/energy view chart button size fix\\n\\n\\n## [1.0.6] - 13.12.2021\\n\\n### Added\\n\\n- Statistics dialog window for charts (sum, min/max/avg)\\n- Crane device (currently hidden)\\n- Pagination in workbench\\n\\n### Changed\\n\\n- ShowEventDot basic control\\n\\n### Fixed\\n\\n- Translation fixes\\n\\n\\n## [1.0.5] - 07.12.2021\\n\\n### Added\\n\\n- SetpointOptimizer: added titles props for systems room temperatures\\n\\n### Changed\\n\\n- updated charts in Setpoint Optimizer\\n\\n### Fixed\\n\\n- bugs in Setpoint Optimizer\\n\\n\\n## [1.0.4] - 06.12.2021\\n\\n### Fixed\\n\\n- bugs in Setpoint Optimizer\\n\\n\\n## [1.0.3] - 03.12.2021\\n\\n### Added\\n\\n- SetpointOptimizer device\\n\\n### Changed\\n\\n- Device previews now use screenshots\\n\\n### Fixed\\n\\n- EMS bugs\\n\\n\\n## [1.0.2] - 26.11.2021\\n\\n### Fixed\\n\\n- problem width chart not getting full width\\n\\n\\n## [1.0.1] - 18.11.2021\\n\\n### Added\\n\\n- New mode in EMS->Settings->Mode Settings dropdown\\n\\n\\n## [1.0.0] - 17.11.2021\\n\\n### Added\\n\\n- TSG whitelabel additions: create device button in areas, hide project info\\n- Offline timer in project\\n\\n### Changed\\n\\n- Difference charts: total sum of series can be shown\\n- Charts catch errors and show error messages instead of loading indefinitely\\n\";","\nimport { Vue, Component } from 'vue-property-decorator';\nimport MarkdownView from '@/ui/components/components/MarkdownView.vue';\nimport changelogData from '../../../CHANGELOG.md';\n\n@Component({\n components: {\n MarkdownView,\n },\n})\nexport default class Changelog extends Vue {\n changelogData = changelogData;\n}\n","import mod from \"-!../../../node_modules/cache-loader/dist/cjs.js??ref--14-0!../../../node_modules/thread-loader/dist/cjs.js!../../../node_modules/babel-loader/lib/index.js!../../../node_modules/ts-loader/index.js??ref--14-3!../../../node_modules/cache-loader/dist/cjs.js??ref--1-0!../../../node_modules/vue-loader/lib/index.js??vue-loader-options!./Changelog.vue?vue&type=script&lang=ts&\"; export default mod; export * from \"-!../../../node_modules/cache-loader/dist/cjs.js??ref--14-0!../../../node_modules/thread-loader/dist/cjs.js!../../../node_modules/babel-loader/lib/index.js!../../../node_modules/ts-loader/index.js??ref--14-3!../../../node_modules/cache-loader/dist/cjs.js??ref--1-0!../../../node_modules/vue-loader/lib/index.js??vue-loader-options!./Changelog.vue?vue&type=script&lang=ts&\"","import { render, staticRenderFns } from \"./Changelog.vue?vue&type=template&id=548c8ea6&\"\nimport script from \"./Changelog.vue?vue&type=script&lang=ts&\"\nexport * from \"./Changelog.vue?vue&type=script&lang=ts&\"\n\n\n/* normalize component */\nimport normalizer from \"!../../../node_modules/vue-loader/lib/runtime/componentNormalizer.js\"\nvar component = normalizer(\n script,\n render,\n staticRenderFns,\n false,\n null,\n null,\n null\n \n)\n\nexport default component.exports"],"sourceRoot":""}